Off Camera Flash Photography: tips from Damien Lovegrove for shooting outdoors

    | Photography Tips | Portraits | 07/06/2013 00:01am

    In our latest Professional Photographer to the Rescue post, famous portrait photographer Damien Lovegrove shares his best off camera flash photography tips for coping with difficult lighting when shooting portraits outdoors.

    Off Camera Flash Photography: tips from Damien Lovegrove for shooting outdoors

    Meet our professional photographer

    Damien Lovegrove is one of the UK’s most sought-after wedding and portrait photographers. Having learned his trade as a cameraman and lighting director at the BBC, he swapped moving imagery for stills ten years ago and has since built up a hugely successful photography business. He now shares his knowledge through workshops and seminars. See

    Meet our apprentice

    Richard Twiner works in a civilian role for the police and recently completed an A-level in Photography. His course taught him all the ins and outs of studio flash, but outdoor and off camera flash still puzzles him. He’d like advice on perfecting his photo composition and lighting skills outside of the studio environment.

    Technique Assessment

    Is Richard using his camera and flash gear in the best possible way?

    Lock and load
    So Richard could use the flashgun away from his DSLR, he attached the Canon Speedlite Transmitter to his 40D’s hotshoe. Damien told Richard to use the lock switch to stop it slipping off mid shoot.

    “When you turn it on, the red pilot light should come on,” says Damien.
“If it’s taking a while then it usually means the batteries are going flat, so always make sure you carry spares.” The ST-E2 Transmitter takes a 2CR5 Lithium battery. We set the transmitter to channel 1.

    Off camera flash tips: switch to slave mode

    Switch to slave
    For Richard’s flashgun to work off camera, he was told to switch it to ‘slave’ mode. On the Speedlite 580EX II, Damien told him to hold down the zoom button for a few seconds until a sub menu appeared. Richard then moved the select dial to turn the ‘slave’ on and pressed Set on the dial.

    He then clicked twice on the zoom button until the channel selector (CH.) started flashing, and set the channel to 1. With flash and transmitter in sight of each other, Richard pressed the pilot light on the transmitter and the flash fired.

    PAGE 1: Meet our professional photographer and apprentice
    PAGE 2: Setting up to shoot off camera flash photography
    PAGE 3: Final off camera flash tips from our professional photographer
    PAGE 4: Our professional photographer’s recommended gear
    PAGE 5: Shot of the Day


    Flash photography made easy: master everything from pop-up flash to multiple flashguns
    How camera flash works: free photography cheat sheet
    Flash compensation: how to get perfectly balanced exposures
    Professional Photographer to the Rescue: outdoor portraits that look like real life

    Posted on Friday, June 7th, 2013 at 12:01 am under Photography Tips, Portraits.

    Tags: , , ,

    Share This Page