Skip to main content

How to use the Nikon DF-M1 dot sight for bird photography

How to use the Nikon DF-M1 dot sight for bird photography
(Image credit: Future)
Useful links

Best camera for wildlife (opens in new tab)
10 ultimate locations for wildlife photographers (opens in new tab)
Best monopod in 2021 (opens in new tab)
Best 100-400mm lenses (opens in new tab)
Best binoculars (opens in new tab)
10 best bits of camera gear: Ross Hoddinott (opens in new tab)

The longer your lens, the harder it is to sight and keep up with your subject. Small movements become exaggerated at higher magnifications and this can make photographing erratic subjects, such as birds, even more challenging. You can see the bird in the distance - but finding it through the viewfinder quickly is hard, unless you have a dot sight to help you line up your lens

Nikon's DF-M1 dot sight is built to help improve your accuracy, and although this super-specialist attachment won’t appeal to everyone, it’s worth looking into if you spend most of your time searching for (or losing) faraway subjects. It is particularly useful with bridge cameras (opens in new tab) with supertelephoto zoom settings – or for use with long telephoto lenses on DSLRs or mirrrorless cameras. The pop-up dot sight slots into the hotshoe of a camera, weighs very little and folds down when not in use.

Video: How to use a Nikon dot sight

In practice, the sight allows you to pinpoint the center of your frame, without narrowing your vision through the viewfinder. This makes it much easier to find and track fast-moving or erratic subjects without losing them.

We used the DF-M1 with both the Nikon Cooolpix P1000 (opens in new tab)’s eye-watering 125x optical zoom and a Nikon Z7 (opens in new tab), with the Nikon AF-S 200-500mm f/5.6E ED VR (opens in new tab)

For the DF-M1 to function properly you need to calibrate the position of the reticle, so it matches the framing of your viewfinder/rear LCD screen perfectly. Thankfully, our tutorial will help you get bang on target!

• Looking for photoshoot ideas? (opens in new tab)

How to use a dot sight

(Image credit: Future)
(opens in new tab)

1. I’ve got the power

The DF-M1 uses a CR2032 battery (found loose in the box). A thin implement is needed to push down the lock pin and access the battery slot. Power is used when the sight pops up. If left inactive for four hours, or by holding the colour selection or brightness buttons, it’ll switch off.

(Image credit: Future)
(opens in new tab)

2. If the shoe fits

The dot sight mounts on top of a camera’s hotshoe and screws into place. It’s officially designed for use with the P1000 and P950 (opens in new tab) bridge cameras. However, we tested it on our D800 and Z 7, and it worked fine. It also comes with a small branded pouch, so you can stow it safely in your bag when not in use.

(Image credit: Future)
(opens in new tab)

3. Custom settings

You can customize the DF-M1 to suit your preferences. A color-selection button allows you to choose between a green or red reticle; brightness buttons let you change the intensity of the dot and a small clickable lever allows you to cycle through three different reticle designs.

(Image credit: Future)
(opens in new tab)

4. In your sights

To calibrate the dot sight you first need to place your camera on a tripod. Then find and sight an object (ideally something that’s roughly the same distance as your subject) and centre it in the frame. We found it helpful to use a single AF point as a guide to ensure the frame is centered perfectly.

(Image credit: Future)
(opens in new tab)

5. Reticle readjustments

Look directly through the sight and turn the two dials either side of the device to place the reticle precisely over your object. Rotate the right dial clockwise to move the reticle up and anticlockwise to move it down. Turn the left dial clockwise to move the reticle left and anticlockwise to move it right.

(Image credit: Future)
(opens in new tab)

Plenty of scope

6. How you use the DF-M1 will depend on personal preference. We used it alongside the rear LCD of our P1000. By holding the camera at arm’s length we could see both the dot sight and screen. It’s also useful for simply sighting a faraway subject; the dot sight gets you in the vicinity before switching over to the much more traditional viewfinder.

Read more

The best binoculars (opens in new tab): binoculars for wildlife, nature and astronomy
The best 100-400mm (opens in new tab) lenses: which is the best zoom for you?
The best lenses for bird photography (opens in new tab)
The best monopod (opens in new tab): the perfect support for telephotos and low light

(opens in new tab)

N-Photo (opens in new tab) is 100% Nikon-devoted, and 100% editorially independent. If you're a Nikon owner and want to improve your images, get the best buying advice and reviews, see some of the world's best Nikon photography,  N-Photo is the title for you. 


Thank you for reading 5 articles this month* Join now for unlimited access

Enjoy your first month for just £1 / $1 / €1

*Read 5 free articles per month without a subscription

Join now for unlimited access

Try first month for just £1 / $1 / €1

Mike Harris
Mike Harris

Mike is Technique Editor for N-Photo: The Nikon Magazine (opens in new tab), and brings with him over 10 years experience writing both freelance and for some of the biggest specialist publications. Prior to joining N-Photo Mike was the production editor for the content marketing team of Wex Photo Video, the UK’s largest online specialist photographic retailer, where he sharpened his skills in both the stills and videography spheres.  


While he’s an avid motorsport photographer, his skills extend to every genre of photography – making him one of Digital Camera World’s top tutors for techniques on cameras, lenses, tripods, filters and other imaging equipment, as well as sharing his expertise on shooting everything from portraits and landscapes to astracts and architecture to wildlife and, yes, fast things going around race tracks.