Anker MagGo Power Bank 2 Pro review: the coolest wireless power bank around?

Anker’s latest MagGo power bank combines 25W Qi2 wireless charging with a smart display, kickstand, and even its own cooling fan

Anker MagGo Power Bank 2 Pro lying beside two smartphones, showing its Qi2 wireless charging surface.
(Image credit: © Gareth Bevan / Digital Camera World)

Digital Camera World Verdict

The Anker MagGo Power Bank 2 Pro is one of the most feature-packed magnetic power banks I have used. Its 25W Qi2.2 wireless charging is quick, the display provides genuinely useful information, and it has an excellent kickstand – which, frankly, all magnetic power banks should have. The headline cooling fan has mixed success. It does help manage the additional heat generated by faster wireless charging, but my phone still became noticeably warm, and the fan itself is audible enough that I found it distracting on my desk in a quiet room. You can turn it off, but then you are disabling one of the main reasons to pay a premium for this particular model. It's also an expensive 10,000mAh power bank. But with 25W wireless and 45W wired charging, a screen, and cooling, there is at least plenty here to justify some of that cost.

Reasons to buy

  • +

    Fast 25W Qi2 charging

  • +

    Useful smart display

  • +

    45W wired charging

  • +

    Excellent built-in kickstand

Reasons to avoid

  • -

    Cooling fan is audible

  • -

    Phone still gets noticeably warm

  • -

    Expensive

  • -

    Included cable is very short

Why you can trust Digital Camera World Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out how we test.

Power banks have become surprisingly complicated. Not all that long ago, the most exciting feature I could reasonably expect was a second USB port. Now Anker is putting color displays, intelligent charging, and even active cooling systems into batteries small enough to carry around in my bag.

The Anker MagGo Power Bank 2 Pro sits right at the top end of Anker's newest generation. It packs a 10,000mAh battery, 25W Qi2.2 magnetic wireless charging, 45W USB-C input and output, a smart display, an adjustable kickstand, and Anker’s SnapCool active cooling system.

It is effectively the successor to the Anker MagGo Power Bank (10K), which I reviewed back in 2024 and which remains one of my favorite magnetic power banks. That model already offered a useful display and kickstand, but was limited to 15W wireless and 27W wired charging. The new model boosts those figures to 25W and 45W respectively while actually coming in slightly smaller and lighter.

It also adds that headline fan. Faster wireless charging generates additional heat; excess heat can cause phones to throttle their charging speed and can decrease battery longevity over time. Anker has therefore built a miniature active cooling system into the power bank to try to keep temperatures under control and sustain faster charging for longer.

But does all this extra engineering make any meaningful difference? I have been using the MagGo 2 Pro with both the iPhone 17 Pro Max and Google Pixel 11 Pro XL to find out.

Specifications

Swipe to scroll horizontally

Capacity

10,000mAh

Wireless charging

Qi2.2, up to 25W

USB-C input / output

Up to 45W

Stand

Integrated, adjustable 0–80°

Dimensions

104 x 71.5 x 17.5mm

Weight

220g

Price

The Anker MagGo Power Bank 2 Pro costs $109.99 in the US and £99.99 in the UK at the time of writing, and is available in four colors.

This is an expensive power bank. There are countless 10,000mAh batteries available for considerably less if you just want a simple no-frills charging brick. However, looking purely at capacity does the MagGo 2 Pro a slight disservice, as there are not many rival power banks currently combining 25W Qi2.2 wireless charging, 45W wired charging, active cooling, a display, and an adjustable stand in one device.

Whether those features are worth around $100 is going to depend heavily on how often you actually use them and how fast you really need to charge your phone. If you're happy to just plug your phone in via a cable, there are significantly cheaper and more powerful alternatives.

Design & Handling

Anker has been doing this a long time now, and the design feels very polished. At 220g, it isn’t exactly featherweight, but 10,000mAh magnetic power banks never are. Interestingly, despite adding the cooling system, Anker has managed to make this generation smaller and lighter than its previous MagGo 10K, which weighed 250g.

With the battery stuck to the back of a phone, it becomes quite chunky, but it's still relatively easy to get my hand around the whole phone and battery and still reach the entire screen, although this will vary depending on your hand size. I also only have the larger iPhone Max and Pixel XL sizes to test, which the MagGo fits nicely onto, but smaller phones will feel more dominated by the power bank.

Rear view of the Anker MagGo Power Bank 2 Pro attached to a smartphone, showing its integrated kickstand and Anker branding.

(Image credit: Gareth Bevan / Digital Camera World)

Side profile of the Anker MagGo Power Bank 2 Pro attached magnetically to a smartphone, showing the battery pack’s thickness and USB-C port.

(Image credit: Gareth Bevan / Digital Camera World)

I genuinely think every magnetic power bank should have a kickstand. The MagGo 2 Pro’s stand is particularly good. It folds neatly into the back of the power bank when not being used and can be adjusted between 0 and 80 degrees. I find myself using the stand even when I'm particularly concerned about charging, which is probably the best endorsement I can give it.

Anker MagGo Power Bank 2 Pro attached magnetically to a smartphone and propped up using its built-in kickstand, with another phone lying alongside.

(Image credit: Gareth Bevan / Digital Camera World)

Like the previous generation, there is a smart display on the edge that cycles through information including charging status, remaining battery, battery health, and temperature. A small button alongside the display lets you switch screens and change charging modes.

Close-up of the Anker MagGo Power Bank 2 Pro attached to a smartphone, with its smart display showing a temperature reading of 35°C.

(Image credit: Gareth Bevan / Digital Camera World)

The cooling fans are behind a fine-mesh grille protecting the fans and air intake, which should stop stray objects in my bag from physically getting into it. But I do wonder how it will fare after months of being exposed to all the collected debris that accumulates at the bottom of my bag, but a week of testing isn’t enough to answer that.

Anker does at least include a rather nice leatherette-style carry pouch, which might prove more useful than it initially appears if it keeps some of that dust away from the vents.

Close-up of the Anker MagGo Power Bank 2 Pro standing upright, showing the cooling vent along its top edge.

(Image credit: Gareth Bevan / Digital Camera World)

There is also a braided USB-C cable in the box. It feels good quality, although it is very short, which limits its usefulness unless your charger is sitting immediately beside the power bank.

Performance

In my testing, the 25W Qi2.2 wireless charging from the MagGo 2 Pro proved impressively quick. I tested it with both an iPhone and a Pixel 11 Pro XL, and I could charge each once, with around a quarter of the tank remaining.

Interestingly, the display actually reported charging at up to 29W at one point on the Pixel in extreme charging mode. That is slightly curious, given the power bank itself is officially rated for a maximum 25W wireless output. I am not sure if you can push the charging slightly higher, or if this was just the screen being a little overenthusiastic.

Smartphone mounted on the Anker MagGo Power Bank 2 Pro using its kickstand, with the phone displaying Extreme Charging Mode settings.

I got the charger to display 29W when wireless charging a Pixel in "Extreme Charging Mode" (Image credit: Gareth Bevan / Digital Camera World)

Anker heavily positions the MagGo 2 Pro around recent iPhones, with its compatibility information specifically highlighting the iPhone 13 through iPhone 18 families. It managed to successfully detect both my iPhone and my Pixel, but the screen didn't display the exact model (though I am not 100% sure if it is meant to).

The smart recognition features were less impressive with the Pixel; the display simply identified it as a generic “Google Device.” It doesn’t affect charging whatsoever, but Pixel support feels comparatively basic despite it supporting the Qi2 standard.

Side view of the Anker MagGo Power Bank 2 Pro resting on a smartphone, with its display showing that an iPhone is charging.

The MagGo successfully identified my iPhone (Image credit: Gareth Bevan / Digital Camera World)

The fan is pretty audible. I wouldn’t call it loud, but it is definitely noticeable. I work from home, and with the power bank charging on my desk beside me, I found the constant fan noise surprisingly distracting. However, in a café, train, or pretty much anywhere with ambient noise, it wouldn't be such an issue.

There is a Silent mode in the settings, accessed using the small side button. This does exactly what it says and stops the fan, which solves the noise problem. Of course, it also turns off the active cooling, which rather undermines the reason for spending more money on this model instead of buying one of Anker’s cheaper magnetic power banks.

Close-up of the Anker MagGo Power Bank 2 Pro attached to a smartphone, with the display indicating that a Google device is charging.

The charger just displays "Google Device" when connected to a Pixel 11 Pro (Image credit: Gareth Bevan / Digital Camera World)

I am also not completely convinced the cooling has the dramatic effect I expected. Even with the fan running at full strength, my phone still became noticeably warm. That doesn’t mean the fan isn't doing anything; managing temperatures is about preventing excessive heat, and I certainly wouldn't say the heat was ever excessive, but I had perhaps expected a more obvious difference over my non-fan-equipped power banks.

Recharging the power bank is quick. Using a 45W charger, it took me roughly an hour and fifteen minutes to bring the power bank back from empty to full. The display mostly hovered around 42W and 45W during the fastest part of the recharge, which broadly tallies with Anker’s claim of reaching 80% in 52 minutes, with charging naturally slowing toward the top of the battery.

The 45W USB-C connection is also a significant upgrade over the previous model’s 27W output and makes it powerful enough for tablets and plenty of smaller laptops – although 10,000mAh might not get you very far.

Verdict

I really like the Anker MagGo Power Bank 2 Pro for a lot of reasons. It looks great, the kickstand is really useful, the 25W Qi2.2 charging is quick, 45W USB-C gives me a fast and more efficient wired alternative, the display is useful, and the 10,000mAh capacity provides enough power to comfortably get a phone through another day.

However, while the cooling fan does keep the temperature down, it's not by enough to really persuade me that I need this more than another non-fan Qi2 power bank. The fan noise is also a bit of an irritant, although it can be disabled.

The MagGo Power Bank 2 Pro is pretty expensive, but if you want one of the most complete and sophisticated magnetic power banks on the market, then look no further.

Swipe to scroll horizontally

Features

★★★★★

Qi2.2 charging, 45W USB-C, a smart display, active cooling, and an excellent adjustable stand make this a feature-packed power bank.

Design

★★★★½

Premium, relatively compact, and topped off by a genuinely brilliant kickstand, although I am curious how the exposed fan grille will cope with long-term dust.

Performance

★★★★☆

Wireless and wired charging are both impressively quick, but the cooling fan is audible and my phone still became warmer than I expected.

Value

★★★½☆

There is a lot of technology packed inside, but its is still a substantial amount to spend on a 10,000mAh power bank.

Overall

★★★★☆

Anker MagGo Power Bank 2 Pro attached to the back of a blue smartphone and held in one hand, showing its built-in kickstand.

(Image credit: Gareth Bevan / Digital Camera World)

Alternatives

Anker MagGo Power Bank (10K)

Anker MagGo Power Bank (10K)

The previous MagGo has the same 10,000mAh capacity, smart display, and excellent kickstand, but tops out at 15W wireless and 27W USB-C, and does so without active cooling.

Anker MagGo 10K Slim Power Bank

Anker MagGo 10K Slim Power Bank

If portability matters more than having every possible feature, the MagGo 10K Slim strips things back. You still get a 10,000mAh battery and Qi2 wireless charging, but in a slimmer design that is easier to slip into a pocket or camera bag. The tradeoff is losing the MagGo 2 Pro’s smart display, active cooling, and integrated stand.

Gareth Bevan
Reviews Editor

Gareth is a photographer based in London, working as a freelance photographer and videographer for the past several years, having the privilege to shoot for some household names. With work focusing on fashion, portrait and lifestyle content creation, he has developed a range of skills covering everything from editorial shoots to social media videos. Outside of work, he has a personal passion for travel and nature photography, with a devotion to sustainability and environmental causes.

You must confirm your public display name before commenting

Please logout and then login again, you will then be prompted to enter your display name.