Watch video: Home photography ideas: Fake natural light portraits with flash
While it’s oh-so-easy to plop your flashgun on your camera's hotshoe and rattle off shots, the results often look unflattering and it’s easy to tell that they weren’t taken in natural light. However, we’re going to show you how to mimic natural light with an artificial flash.
The easiest way to do this is to take an existing source of natural light, like a window or a doorway, and control the light through that space. By putting a flashgun outside said window or door, you can mimic the effect of natural light flooding into your shooting area. Diffuse it with a simple bedsheet and it can produce some of the best light around – no need for an expensive octabox.
• Get more photoshoot ideas
You can do this shoot with things you already own, so why not ask a family member to pose for you while they're hard at work with a task for some natural portraits.
Fake a natural light portrait with flash
Tuck in your sheets
Fasten your bedsheet over a window or doorway. If there’s something to clip your sheet on to, then use some DIY clips to hold it in place, otherwise use your gaffer tape. Even with clips, you might find that you need to stick it down with the gaffer tape to stop it blowing away.
Bring the light
Put your flash on a stand the other side of the sheet from your subject, and set it to full power. Stand it about a meter away, aimed at the middle of the sheet. Set the flash to manual mode if you have TTL capabilities, and if it has a zoom function, set it to the widest setting.
To maximize the brightness of the light and the ‘wrapping’ effect it has, place your model close to the sheet. The further away from the light source they are, the darker the scene will be. This will force you to ramp up your ISO, which can introduce noise.
Carving the settings
Set your camera to manual mode for full control. Choose either automatic or flash white balance and shoot in RAW – this way you can change the white balance later if you need to. Set the widest aperture possible (f/2.8 in our case), and a shutter speed of 1/200 sec with ISO100.
Chisel the features
If your images are coming out overexposed, but you don’t want to change your settings, you can use a neutral density filter to block some of the light entering the lens. A variable ND filter will enable you to tweak the darkness until you get well-balanced exposures every time.
Scoop out the detail
Shoot using a zoom lens like a 70-200mm. Take it to 70mm to get the whole model in and then push further in to 200mm to get details of the hands if your model is posing with intricate pieces.
• Best flashgun in 2020: the best strobe units for Canon cameras, Nikon and more
• Best camera for beginners in 2020: Start your journey with the right camera!
• Best variable ND filters: fader filters for video and photography
• Newborn photography tips