Skip to main content

Hollywood trickery! Turn the daytime to night in-camera

Peter Fenech
Before: This scene suffers from a lack of attractive lighting, but is itself a fetching location. Currently there is insufficient interest to make an enticing image. (Image credit: Peter Fenech)

Shooting at night can produce extremely atmospheric images, with deep shadows and strong contrast complimenting a predominance of cool hues. However, the low light conditions can introduce many challenges, with camera shake and difficult focussing working to degrade image quality. 

A creative solution is to shoot during the day, when ambient light is in greater supply and then adjust exposure and colour to produce a ‘fake’ nighttime effect. This is a technique commonly employed in cinema camera work and which, using a sharp eye, can be identified in many blockbuster films.

More: What is exposure?

The concept is to underexpose the image, by stopping down the aperture or, more often, by pushing up the shutter speed, thereby cutting ambient light and producing a darker mood. White balance control is then used to introduce a cool colour bias, to simulate evening lighting.

For the effect to work, the light present must be diffused - any direct sunlight will give away the actual time of day and spoil the tone of the image. This is a common mistake photographers make when trying the technique for the first time. Shooting on a cloudy day will ensure the look is credible and will make exposure easier to calculate. For subject matter, wooded landscapes or environmental portraits make engaging images. 

1- Find a shaded location

(Image credit: Future)

Either wait for an overcast day or locate a scene which is not touched by direct sunlight. Woodland landscapes are often shaded and with the sky composed out, readily suit the evening-like atmosphere.

2- Switch to aperture priority

(Image credit: Future)

Choose A or Av from the mode dial and select an f/stop to produce appropriate depth-of-field for your scene. In this case f/11 was needed to ensure all of the trees from front to back were in focus.

3- Choose nighttime colours

(Image credit: Future)

Choose a Tungsten or Fluorescent white balance preset to tone the image with a blueish cast, replicating the lighting and colour of late evening. Try a subtle effect first and adjust later if necessary. 

4- Turn out the lights

(Image credit: Future)

Use exposure compensation to reduce the exposure and darken the image. Start at -2EV to deepen shadows, giving the impression of minimal ambient light flooding the scene. Use -3EV for a stronger effect.  

5- Raise the ISO

(Image credit: Future)

An effective optional effect is to intentionally add some image grain by using a higher ISO. This further pushes the feel of the image being shot in low-light and adds to the filmic scene atmosphere. 

6- Adjust colour temperature

(Image credit: Future)

To customise the cool cast, use a specific colour temperature if neither white balance preset provides the strength you want. Start with a value of around 2500K and increase this if the cast is too strong. 

After: Darkness in the light - Whilst technically incorrect, by ‘misrepresenting’ the colour and brightness of the scene, a far more impactful and cinematic image than the original has been created.  (Image credit: Peter Fenech)

Read more

A night with the stars: how to shoot amazing astrophotography

Lightroom series part 16: Enhance a night-time photograph with Lightroom

The best light pollution filters in 2021 for astrophotography and star gazing

Peter Fenech

Peter spends most of his day writing for Digital Photographer Magazine. See his tutorials and much, much more, from some of the best pros in the industry, by subscribing today!

You can see more of Peter's images on his portfolio or you can follow his ramblings on Instagram.