X
We need your consent

We and our partners use technology such as cookies on our site to personalise content and ads, provide social media features, and analyse our traffic. Click below to consent to the use of this technology across the web. Go to our Cookies Policy for more information on how we use cookies. You can change your mind and change your consent choices at any time by returning to this site.

How to add a feathered gradient to flash images

Learn how to use a high shutter speed with flash to create an attractive light gradient effect for portraits

Every DSLR camera has a maximum shutter speed at which there can be an effective synchronisation with a flash unit. The flash duration must exceed or match the duration of the total exposure, or the scene will not be evenly illuminated. 

However, if used in moderation and with the correct camera mode, the otherwise-undesirable frame darkening can be used creatively. By employing high-speed flash synchronisation and increasing the shutter speed above the maximum limit, a feathered brightness gradient is introduced. 

This helps to direct the viewer’s focus within the frame and gives an image some visual weight at the bottom of the composition. This is a very popular technique with portrait and wedding photographers, especially when on location, where extraneous detail may compete with your subject for attention.

It is also a very easy technique to learn and can be employed without requiring further kit investment. You may find that you have to use an external flashgun for this work, as some built-in camera flashes won’t be able to use the high-speed mode.

Step-by-step guide: How to introduce a feathered brightness gradient

1. Attach the flash

Attach an external flash unit or turn on the camera’s built-in flash. Diffuse the light as required for a softer appearance. Ensure there is good ambient light to avoid background underexposure.

2. Meter the scene (Av mode)

In Aperture Priority Mode, calculate an appropriate overall exposure, using matrix or evaluative metering. You can use TTL (through the lens) flash metering for accuracy, or adjust for flash light later.

3. Switch to Manual

TTL flash metering can vary in its reliability from scene to scene. To avoid any unpredictable exposure chances as you compose you shot, use the Manual exposure mode and enter the settings suggested by the camera in the previous step.

4. Set the flash-sync mode

To enable you to raise the shutter speed above the native maximum flash sync speed, enter the camera menu and choose the highest possible flash synchronisation setting. Some cameras may have a single High Speed option. 

5. Increase shutter speed

Use the command dial to increase shorten the exposure. Start at around 1 stop above the max sync, then progressively increase the speed until you get the desired effect, using the LCD to review your progress.

6. Adjust your exposure

Depending on the amount of ambient light, you may have to adjust the flash output, to better blend with the background. If parts of the scene darken too far, increase f/stop or ISO to balance lighting.

Before: While lighting is even and pleasant, it is overly uniform, meaning the intended focal point of the image (the face) is unclear to the viewer

After: By shortening the exposure by a couple of stops, a subtle light fall-off effect is introduced, drawing attention to the important area of the frame

 

Read more: How to use flash – High speed sync

Recent news