PhotoPlus Practical Photoshop N-Photo Digital Camera World
Go Back   Digital Camera World Forum > Photography Technique > General photography technique

General photography technique If you've got a photographic question, post it here - many of our forum members are able to offer advice, ideas and inspiration.

Reply
 
Thread Tools
  #1  
Old 23-09-11, 06:37 PM
davewebleyphotography's Avatar
davewebleyphotography davewebleyphotography is offline
Member
 
Join Date: Aug 2011
Posts: 99
Tips for taking photos at a fair at night

Hi All,

Like most towns we have a annual fair for a few weeks in October. I want to get those shots where you see the rides blurred at night with plenty of bright lights.

I will of course take a tripod, any advice on shutter speeds/ / ISO settings?

Cheers,

Dave
Reply With Quote
  #2  
Old 23-09-11, 09:53 PM
OldBoy's Avatar
OldBoy OldBoy is offline
Senior Member
 
Join Date: Aug 2009
Posts: 2,000
Images: 3
It depends on the light levels and what shutter speed/ Aperture you use. If you have any ND grads then you could use them as well. I used ND grads so reducing the shutter speed to about two seconds, but you can get blur at 60/s handheld. Set up you camera on a tripod, select you Aperture at F11 and shutter speed at 30/s then press you shutter button half way and check what Iso you camera shows. Adjust until your Iso is about 200. Take a shot and checked if it's blurred enough, if not reduce your shutter speed 15/s and try again.
Reply With Quote
  #3  
Old 25-09-11, 07:22 PM
davewebleyphotography's Avatar
davewebleyphotography davewebleyphotography is offline
Member
 
Join Date: Aug 2011
Posts: 99
Thanks for the advice, I will post a few pictures in a few weeks once the fair have been.
Reply With Quote
  #4  
Old 23-02-12, 06:06 PM
wizkids wizkids is offline
Junior Member
 
Join Date: Jan 2012
Posts: 10
Thanks OldBoy. I always ran into this problem as well. I didn't realize changing the shutter speed would affect the blurring so drastically! ( I am fairly new to photography).
Reply With Quote
  #5  
Old 10-09-12, 09:56 AM
patrickwilson86 patrickwilson86 is offline
Member
 
Join Date: Aug 2012
Posts: 35
The number one rule of night scenes is stability. A heavy, sturdy tripod is a great start. If you have a cheap flimsy tripod, invest a few bucks in sand bags and stabilize it like you’re ready for hurricane season. A cable release (or “remote switch”) is highly recommended, since pressing the button to take the picture is often the main source of camera shake and, ultimately, blur. If you don’t have a remote switch for your camera, put your camera in timer mode so the shutter will release a few seconds after you press the button. Canon wised up and added a 2 second timer mode on their newer cameras for this purpose so you don’t have to wait the full ten seconds every time you want a stable release.


Get more tips for night photography

http://digital-photography-school.com/night-photography

http://www.photographytalk.com/photo...g-night-scenes
Reply With Quote
  #6  
Old 15-09-12, 10:51 AM
hanberger hanberger is offline
Junior Member
 
Join Date: Jun 2012
Posts: 11
Oh, i am puzzled by this problem so long time,
__________________
Prints on Canvas
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump