How do you Frame A3 prints?
View Single Post
20-10-09, 01:36 PM
Join Date: Jul 2009
Originally Posted by
Ok, Well I could do with a Cutter for my Uni work anyway ( Architecture, model making ). Would this be suitable
? Can you ' start and stop' with this so that you place 2inches of the card in the blade then cut, rather then just cut it from the edge ? I already have a cutting mat too, but that's for freehand cutting really.
Do you need to glue anything or will the clips on the frame hold it just perfectly ? Any reccomendations on how to clean the glass, will normal window cleaner do the trick ?
No that is just a trimmer you need something that will cut a hole in the middle of the card with a beveled edge
something like this
If the backing board, front Matt and print are all the same size you will not need to glue anything as I find they rarely are, I fix the picture in place to the front Matt with masking tape
sorry link does not work
Make mine a double
Call Ed Crowther Photography on 07761926172 or Visit www.edcrowther.com
Weddings, Commercial, and Portrait photography in the Wessex region
View Forum Profile
Send a private message to ether
Visit ether's homepage!
Find all posts by ether