Digital Camera World Forum

Digital Camera World Forum (http://www.digitalcameraworld.com/forum/index.php)
-   Beginner photography questions (http://www.digitalcameraworld.com/forum/forumdisplay.php?f=14)
-   -   Set up advice Nikon D3100 (http://www.digitalcameraworld.com/forum/showthread.php?t=9502)

Beaubeau 04-10-12 07:37 PM

Set up advice Nikon D3100
 
[B][B]I am a total novice with little technical skills!! I have a Nikon D3100 and have a [/B]Nikon AF-S DX NIKKOR 55-300mm f/4.5-5.6G ED VR Lens. My son is playing mini rugby on Saturday and would like to take some shots. Whilst I appreciate this is not the right kit, has anyone any tips for the best set up to try and get a few shots? Would a monopod help?[/B]

[SIZE=3][FONT=Calibri]Thanks[/FONT][/SIZE]

markgozz 04-10-12 09:30 PM

Any extra support like a monopod will help you to get the sharpest shots possible so if you have one then use it , as for your set up it might be a good idea to use your cameras sports program setting , that way you stand a good chance of getting the shots your after and then in time and with more practice you can start to use more of the manual settings .

Good luck and have fun .

Mark

greenwing 04-10-12 10:10 PM

I think if you don't know how to use a monopod, it's likely to get in your way rather than helping. Use aperture priority (A on the dial (do you have a dial?)) and set the aperture to 8. Enable Auto ISO, with a maximum ISO of 1600 and minimum shutter speed of 1 / 250. This should give you well exposed shots, without too much noise.

Enable VR on your lens, and make sure that when you take a picture, you've held the button down half-way for a half-second or so. When getting ready to take a shot, press the shutter half way to get the camera ready.

Not sure what focus modes you have, and how to set them. You want Continuous, I think, rather than Single.

Will try to add more tomorrow.

Good luck
Chris


All times are GMT. The time now is 11:10 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.