What is shutter speed: 7 questions new photographers always ask
What is shutter speed? In this quick primer we’ll explain how to use shutter speed to make your exposures faster or slower for instant photographic creativity.
Image by Marcus Hawkins
What is shutter speed and what does it do?
Shutter speed is a measure of how long your camera’s sensor (the digital equivalent of film) is exposed to light.
Most DSLRs use a mechanical shutter to control this. When you press the shutter release button or use the camera’s self-timer function, the blades that block the sensor open and close, letting light in.
How long should the shutter be open?
It depends on the amount of light that’s available. Typically, lower light levels demand longer shutter speeds while brighter conditions require much shorter shutter speeds to make an exposure.
Significantly, the choice of shutter speed also has an impact on how movement is recorded in the picture.
The longer the shutter is open, the greater the likelihood there is of any movement being blurred.
As a rule, you’d use the fastest shutter speeds for fast-moving subjects, to stop the motion and make sharp pictures. But rules are meant to be broken!
You can select from a much wider range of shutter speeds than the one suggested by the camera.
What do you mean?
Say you’re shooting action, such as a horse galloping or a car on a race track. To get a sharp shot, you may need a shutter speed close to 1/1,000 sec or 1/2,000 sec.
Freezing the action this way might reveal detail you’d miss with the naked eye, but it can also rob a scene of its sense of speed.
Using a slower shutter speed would allow the shutter to stay open for longer, and some of the moving parts to become blurred – an effective technique for action photography when combined with ‘panning’.
By moving the camera so the subject stays more or less in the same position within the frame, it will remain sharp, while the moving background will be rendered as a blur.
How do I know which shutter speed will produce the best effect?
It depends on the speed at which the subject is moving. It’s often a fine line between the perfect blend of blur and sharpness, and something that looks like a mistake.
That galloping horse? You can probably get away with 1/50 sec for a panned shot, but a Formula One car would still need a nippy ‘slow’ shutter speed in the region of 1/500 sec for a similar degree of blur.
A monopod or an image-stabilised lens helps to support the camera at these lower speeds, ensuring a smooth pan in one direction.
If you’re using very slow shutter speeds, you’ll get better results with a tripod – and in many cases, it’s a necessity.
SEE MORE: The best shutter speeds for every situation – free photography cheat sheet
When would I use very slow speeds?
Landscape photographers typically use long exposures that last for multiple seconds, even many minutes.
This is often the trade-off that comes from using small apertures to increase the depth of field and sharpness in a scene.
Remember that making an exposure is a balancing act between shutter speed, aperture and ISO: as one increases, one of the other two settings has to decrease to maintain the same exposure level.
However, a long exposure can transform a lifeless landscape. Moving water, whether it’s a waterfall, river or waves, will melt into a milky white blur, while trees and flowers blown by the wind add a painterly quality to pictures.
The shutter speeds required to achieve these effects depend on how much light there is and how fast the element is moving.
The strength of the effect is largely a matter of taste too, but anything from 1/15 sec to 10 seconds will produce interesting results.
To achieve exposures as long as this in daylight may require the use of filters on the lens.
SEE MORE: Slow shutter speeds – how to get consistent exposures every time
What filters do I need?
Neutral-density filters. These dark grey filters block the amount of light entering the lens and are available in a range of different strengths, each enabling the use of progressively slower shutter speeds.
Very strong ND filters, combined with small apertures and low ISO sensitivities, enable the use of shutter speeds that stretch for minutes, even in the middle of a clear summer day.
They’re routinely used to create minimalist long-exposure coastal pictures in which a rough sea resembles a polished ice rink.
Of course, if you’re shooting at night you may not need a filter at all, as exposures will be naturally be much longer.
The longest shutter speed available in Shutter Priority is 30 seconds. Where’s the ‘minutes’ option?
To go beyond 30 seconds, you’ll need to use your camera’s Bulb exposure mode.
On most cameras you can access this via the B setting on the mode dial, or by scrolling past the 30 second mark in Manual exposure mode until ‘Bulb’ appears on the display.
In Bulb mode, the shutter stays open for as long as you keep the shutter release button depressed.
It’s best to use a remote release to do this, as pressing the button on the camera for minutes at a time isn’t very practical.
At night, you can use Bulb mode to photograph star trails, firework displays and moonlit landscapes. It’s also the mode of choice for shots taken with very strong ND filters.
PAGE 1: What is shutter speed?
PAGE 2: Which shutter speed is best?
PAGE 3: How to control shutter speed
Common mistakes at every shutter speed (and the best settings you should use)
Using shutter speed creatively: how to take control of your shutter for cool effects
Bulb mode: how to get pro-quality shots in low light
What is ISO: camera sensitivity settings and the best ways to use them
on Thursday, March 20th, 2014 at 12:01 am under Photography for Beginners.
Tags: beginner tips, camera tips, Photo effects