Exposure Bracketing: how to do it manually and how your AEB can help

    | Photography Tips | 13/11/2013 12:33pm
    0 Comments

    If you’re struggling to get well-exposed images in mixed light, try these simple exposure bracketing techniques to help preserve shadow and highlight detail. In this post we show you how to bracket both manually and using your cameras Auto Exposure Bracketing (AEB) feature.

    Exposure Bracketing: how to capture fine detail in shadows and highlights

    Image by Mark Hamblin

    Exposure bracketing is a term used to describe the technique of taking three or more shots of exactly the same scene using a different exposure setting for each one.

    The idea when using the exposure bracketing technique is to make sure you have one shot that is correctly exposed – a fail-safe method, if you like. It was common practice when shooting film, when exposure had to be very precise.

    With digital it could be argued it’s less important, as there are ways of rescuing poorly exposed shots. However, it’s far better to produce a correctly exposed image in camera.

    JUMP TO: Bracketing explained – what you need to know about maximising detail

    Exposure bracketing is especially worthwhile in difficult lighting situations when it’s hard to be sure of the ‘correct’ exposure.

    By taking several shots at different settings you can then decide which one works best on later viewing. In extreme lighting situations it can be invaluable if you want to create high dynamic range (HDR) images by taking a series of exposures to record detail in highlights and shadows and then using software to seamlessly combine the images.

    The usual method for exposure bracketing is to keep the aperture setting constant (f/16 for landscapes, for example) and then make changes to the shutter speed, which can be done easily in Manual (M) mode.

    The difference between exposures can be a full ‘stop’ (1/15, 1/30, 1/60 sec); half stop (1/30, 1/45, 1/60) or even a third stop (1/30, 1/40, 1/50, 1/60) for careful fine-tuning of the exposure.

    SEE MORE: 10 common exposure problems every photographer faces (and how to fix them)

    Manual exposure bracketing step-by-step

    Exposure bracketing step-by-step: step 1

    Bracket manually
    Select Manual (M) mode, compose the shot and set the aperture to f/16. To take an exposure reading, use the Average/Evaluative metering mode and then align the indicator bar with the centre mark or ‘0’ on the exposure indicator scale.

    Exposure bracketing step-by-step: step 2

    Adjust the shutter speed
    Take the first shot using the settings the camera has calculated to be correct. With the same aperture, manually change the shutter speed so the indicator bar is aligned with +1 on the scale and take the shot. Do the same with the indicator aligned with -1.

    Exposure bracketing step-by-step: step 3

    Tweaking the technique
    If the lighting is more extreme (or for an HDR image) take two further shots at +2 and -2. Conversely, if you wish to only alter the exposure by a small amount, take three shots at 0, +0.5 and -0.5. You can chose 0, +1 and +2 if you only want to brighten the shot.

    PAGE 1: Manual exposure bracketing step by step
    PAGE 2: How to use your camera’s auto exposure bracketing feature

    READ MORE

    Histogram: photography cheat sheets for achieving perfect exposure
    Dynamic Range: what you need to know about capturing all the tones in a scene
    Expose to the right: the camera technique every landscape photographer must know
    Conquer underexposure: how to rescue shadow detail and how to deal with the noise
    Famous photographers: 100 things we wish we knew starting out


    Posted on Wednesday, November 13th, 2013 at 12:33 pm under Photography Tips.

    Tags: ,

    Share This Page

    sssss